⎝⎛真人博狗⎞⎠

无锡创想分析仪器有限公司

Stock Code: 202213

National unified free consultation hotline: 400-0833-980

Service Support

To first-class products
Quality service to meet customer needs

Current Location: ⎝⎛真人博狗⎞⎠ >> Service Support >> Download Center
Wuxi Chuangxiang Analysis Instrument Co., Ltd.

Domestic market department

0510-83205379 0510-66882099 13301511032

Ministry of International Trade

0510-68795132 15106177808

Fax: 0510-83213469

E-mail: [email protected]

Address: No. 8 Chaoyang Road, South Zone, Hujing Industrial Park, Binhu District, Wuxi

Free consultation hotline:

400-0833-980

Pros and cons of direct-reading spectrometer grinding prototypes and milling machines

Release time: 2020-01-09 11:29:03 Click: 365

, 用于光谱试样抛光的设备。 Spectral grinding sample machine is a device for polishing the spectroscopic sample in the process of preparing the spectroscopic sample . Specimens polished by a spectrometer can obtain a mirror-like surface, which is more conducive to accurate spectral analysis.

直读光谱仪磨样机和铣床的优缺点

Pros and cons of direct-reading spectrometer grinding prototypes and milling machines

Detection of aluminum and silicon

Mill the surface of the sample with a milling machine, and the processed surface is good without pollution . When grinding with a sample machine, the material of the abrasive belt is generally made of alumina or silicide, which has an impact on the analysis of elements such as aluminum and silicon, and the texture of the same sample made by the new and old abrasive belts will affect the analysis result There are varying degrees of impact. The grinding machine can use abrasive belts of special materials, such as zirconia materials, to solve the problem of contamination of grinding samples.

直读光谱仪磨样机和铣床的优缺点

Pros and cons of direct-reading spectrometer grinding prototypes and milling machines
Simple maintenance of grinding machine, relatively troublesome maintenance of milling machine
The cost of the belt grinding prototype is very low, compared to the cost of a milling machine, which can also process accessories.
When grinding the samples, the samples should be ground at the same position, and do not swing back and forth or left and right. The surface of the ground samples should always be in the same direction, and there should be no cross lines. Because iron or stainless steel samples are relatively difficult to grind, if the surface temperature of the sample is extremely high, we can use cooling water to locally cool it and then grind it until the sample is flattened and the surface texture is uniform. After the sample is ground, We cannot touch the surface with the hand or other things, and do not allow the surface to be covered with dust. This will affect the accuracy of the analysis.

The above is about the advantages and disadvantages of the spectrometer grinding prototype. Buy a direct-reading spectrometer grinding prototype and milling machine, consider the creation of the instrument, and give you a satisfactory product.

下一篇: 直读光谱仪的光谱入射光路结构 Previous : Exploring the quality of direct reading spectrometer production curve Next : Spectral incident light path structure of direct reading spectrometer

hot key words:

Direct Reading Spectrometer

High frequency infrared carbon and sulfur analyzer

Spark direct reading spectrometer

Portable spectrometer

Photoelectric direct reading spectrum analyzer


苏ICP备16025720号全国统一免费咨询服务热线400-0833-980地址:江苏省无锡市滨湖区胡埭工业园南区富润路8号 -Copyright : Wuxi Chuangxiang Analytical Instrument Co., Ltd. Su ICP No. 16025720 National Unified Free Consultation Service Hotline 400-0833-980 Address: No. 8 Furun Road, South District, Hujing Industrial Park, Binhu District, Wuxi City, Jiangsu Province
Copyright copy; 2015 gxcxe.com studio All Rights Reserved-
七乐彩 欢乐拼三张 真人游戏平台注册 必赢真人娱乐