⎝⎛真人博狗⎞⎠

无锡创想分析仪器有限公司

Stock Code: 202213

National unified free consultation hotline: 400-0833-980

Service Support

To first-class products
Quality service to meet customer needs

Current Location: ⎝⎛真人博狗⎞⎠ >> Service Support >> Download Center
Wuxi Chuangxiang Analysis Instrument Co., Ltd.

Domestic market department

0510-83205379 0510-66882099 13301511032

Ministry of International Trade

0510-68795132 15106177808

Fax: 0510-83213469

E-mail: [email protected]

Address: No. 8 Chaoyang Road, South Zone, Hujing Industrial Park, Binhu District, Wuxi

Free consultation hotline:

400-0833-980

About Alloy Analyzer

Release time: 2018-10-17 09:40:49 Click: 4724

Alloy analyzer , network interpretation was born on the basis of X-ray theory. It is mainly used for on-site determination of elemental components in metal materials in the fields of military industry, aerospace, steel, petrochemical, power, pharmaceutical and other fields. It is an industry and military that accompanied the rise of the world economy. An essential tool for rapid component identification in manufacturing. "
Personally, I think this is not comprehensive. The alloy analyzer is an instrument for analyzing the metal composition of alloys. Alloys are substances with metal characteristics synthesized from two or more metals or metals and non-metals through a certain formula. There are tens of thousands of known alloys. Like aluminum alloy, magnesium alloy, zinc alloy, nickel alloy and so on.

In the industry, if it comes to the analysis and detection of alloy products, in addition to the X-ray fluorescence spectrometer based on the X-ray theory mentioned in this explanation, it is also divided into desktop and handheld; the energy dispersion spectrometer based on the X-ray theory; also There are direct-reading spectrometers that analyze the element content of the alloy by obtaining the elemental wavelength after excitation. In addition, carbon-sulfur analyzers burn samples using a high-frequency heating furnace and use infrared absorption to test the carbon and sulfur in the sample. The mass fraction of the two elements, of course, this instrument can only test the carbon and sulfur content ..., different instruments are generated because of different needs, it is reasonable to exist.

CS-910高频红外碳硫仪CX-5500手持式X荧光光谱仪

CS-910 high frequency infrared carbon and sulfur analyzer CX-5500 handheld X-ray fluorescence spectrometer

What follows is the general difference between an X-ray fluorescence spectrometer and a direct reading spectrometer.
X-ray fluorescence spectrometer can perform elemental determination on various materials, regardless of the sample being tested, including solid, powder, and liquid. In addition to alloy analysis, it can also perform ore analysis, soil analysis, and ROHS analysis. For XRF analysis, sample preparation is simple and the measurement range is relatively wide. Like the more popular handheld devices on the market, one-handed operation, a little light, without much training, the data can be displayed on the screen. Our current product line is the ATOMRAY CX-5500 handheld X fluorescence spectrometer . The other is the desktop, which is more suitable for laboratory use, and the handheld will be more used in the field and field.

For direct reading spectrometers, there are more requirements for detecting samples. The surface must be flat, be processed, argon, vacuum, etc., and the operator needs special training. Roughly, it seems to be more fluorescent than X Spectrometers are much more complicated. But, as I said before, existence is reasonable. Direct reading spectrometer is an important detection method in metallurgy, foundry industry and other fields. It can accurately analyze metal samples belonging to a specific brand, and the detection accuracy can reach ppm / ppb level. In addition to the popular CCD full-spectrum direct-reading spectrometers, the direct-reading spectrometers using photomultiplier tube (PMT) technology are better than the CCD type in detection accuracy, but the PMT is more cumbersome and the increase in detection channels is more complicated. Of course, the price Also more expensive. Therefore, most companies actually choose CCD full-spectrum direct-reading spectrometers. Of course, in terms of product selection, they still have to compare according to their actual needs. Our company's current product line is CCD type, the fine division is vacuum type CX9800, argon type CX9500, etc., and there is a mobile CX-9900 suitable for outdoor.

CX-5500手持式X荧光光谱仪CX-9900移动式直读光谱仪

CX-9900移动式直读光谱仪 CX-9800 direct reading spectrometer CX-9900 mobile direct reading spectrometer

In addition to these two, there are many other instruments that will not be introduced one by one. After all, the term alloy analyzer is relatively large, not to mention which one is specifically meant.

下一篇: 关于碳硫分析仪 Previous: Application of alloy analyzer in non-ferrous metal industryNext : About carbon and sulfur analyzer

hot key words:

Direct Reading Spectrometer

High frequency infrared carbon and sulfur analyzer

Spark direct reading spectrometer

Portable spectrometer

Photoelectric direct reading spectrum analyzer

relevant information

苏ICP备16025720号全国统一免费咨询服务热线400-0833-980地址:江苏省无锡市滨湖区胡埭工业园南区富润路8号 -Copyright : Wuxi Chuangxiang Analytical Instrument Co., Ltd. Su ICP No. 16025720 National Unified Free Consultation Service Hotline 400-0833-980 Address: No. 8 Furun Road, South District, Hujing Industrial Park, Binhu District, Wuxi City, Jiangsu Province
Copyright copy; 2015 gxcxe.com studio All Rights Reserved-
七乐彩 欢乐拼三张 真人游戏平台注册 必赢真人娱乐